Recent Mold Remediation Posts
How to Keep Your Swamp Cooler in Working Order
A swamp cooler can grow mold
How to Keep Your Swamp Cooler in Working Order
Summer in Enka,NC, is dangerously hot. Temperatures skyrocket and it seems as though cold air isn’t found anywhere. Have you gotten out your swamp cooler? Is it working like it should? Like an air conditioner, a swamp cooler can grow mold. Regular maintenance is essential to prevent mold growth. It’s time to do some swamp cooler maintenance. Use the following as a checklist.
1. Remove the panels and clean out the water tray.
Any debris left in the tray can build up and cause a leaking swamp cooler. You can repair the water pan by using roofing cement or tar to patch any holes. Look for split seams or rusted areas.
2. Check the fan belt. It can loosen up over time or stretch out with use. Make sure the belt is secure around the pulley. Adjust as needed. If there’s squeaking, you’ve got the belt too tight.
3. Lubricate the blower bearings. Fill the reservoir cup to the top. Oil motors that do not have sealed bearings. Without enough oil, the bearings will seize up and cause the motor to overheat.
4. Replace the cooler pads every year. The pads are what keep the cool air coming. As water passes through the pads the fan blows over them releasing the cold. The fiber cooling pad is one most commonly used. Aspen wood is usually the go-to, but other pads are made from cellulose fiber and synthetic fiber.
Once the maintenance is complete start it running. Check to see if there are any leaks. If so, the following issues may be causing the leaking swamp cooler.
Loose water lines
If you can’t fix the leaking swamp cooler yourself, it’s probably time for a new one. They are expensive. You’ve got a choice to make. New swamp cooler or mold removal or remediation? A mold remediation specialist can give you more information.
How To Determine If There Is Mold in Your Air Ducts
Once mold gets into the HVAC unit, it can easily spread throughout your commercial building
How To Determine If There Is Mold in Your Air Ducts
Since mold thrives in wet areas, it is particularly common to find spores within the building’s heating and air conditioning unit. Regular HVAC cleaning can limit the growth of mold in moist areas of the system, such as:
- Evaporator coils
- Drip pans
- Air ducts
Once mold gets into the HVAC unit, it can easily spread throughout your commercial building. You thus need to detect the presence of mold quickly. Thankfully, there are some easy ways to tell if excess mold is growing in your cooling and heating system.
Use Your Eyes
Mold has a pretty distinct appearance, so you may be able to see it as it grows. You should also regularly check moist areas such as ducts and coils for signs of mold. Look out for any wet spots or leaks, as well. , If you do see any buildup of water, perform an HVAC cleaning immediately and inspect the site for mold spores.
Use Your Nose
Mold also typically produces a musty odor. Once you start to smell mildew in your building, try turning off the HVAC unit to see if that reduces the stench. If the odor goes away when the system is off, then you have likely found the location of the mold.
A mold infestation can be disastrous for your Avery Creek,NC, business. After all, you have to remove your employees and customers from your building during the cleanup process, which can affect productivity and profits.
Cleaning vents can prevent the spread of mold within the building. You may also be able to see or smell the mold during your HVAC cleaning.
If you do find mold, you should not attempt to fix the problem yourself. Commercial mold remediation specialists can find the source of the increased mold growth and make sure the excess spores don’t return. They can even help control odors. Best of all, they can address the issue quickly, which minimizes the disruption to your business.
What Every Homeowner Should Know About Mold Growth
Discoloration in your home's wall indicates mold is present
Discoloration in your home’s walls or ceilings or a musty odor are often indicators that mold is present in your home in Leicester,NC. Various funguses such as black mold can cause major destruction to a house. It benefits homeowners to learn about this growth in homes and how to prevent it.
What Causes Mold Growth in Homes?
The cause for mold growing in the home may not be immediately apparent, but knowing what issues are commonly associated with spreading and developing spores can be useful. Several factors can contribute:
- Access to organic materials, such as dirt, carpet and wood and other building materials
- A moisture problem in bathrooms, basements or other areas prone to high levels of humidity
- Water damage that is left untreated
Will Mold Go Away on Its Own?
Mold generally does not disappear on its own, and the root of the problem, which may be a water leak or an area with high humidity, often needs to be addressed to slow or stop the growth. Additionally, other factors such as airflow in the home could affect the spores’ ability to spread. To get rid of harmful problems such as black mold in your home, you may want to consider employing remediation specialists to assist you in the mold cleanup process.
How Can You Prevent Mold Growth in Your Home?
Preventing it from growing is often much less time-consuming and less costly than the process of mold remediation and restoration. Reducing the amount of humidity in your home by using dehumidifiers or increasing the airflow can help to prevent the spread of these funguses. Additionally, it can be helpful to frequently inspect the areas in your home that may be prone to growth, such as bathrooms, kitchens, under sinks and basements.
It’s valuable to know how to prevent problems from occurring in your home such as black mold damage. Understanding the causes of mold growth, realizing that spores won’t disappear on their own and taking measures to prevent growth can be helpful.
Keeping Mold Under Control During the Remediation Process
Removing mold from your Asheville, NC home is a necessary task.
Three important steps to properly contain and extract mold from a home.
Removing mold from your Asheville, NC home is a necessary task, one that must be taken care of quickly and efficiently. When a professionally-trained mold remediation team comes in to handle the removal of said mold, a step-by-step process must be adhered to in order to prevent mold contamination in other areas that are otherwise unaffected. Here is a quick look at how technicians handle the process, showing three important steps they take to properly contain and extract mold from a home.
1. Turn off the water supply and isolate the area. First and foremost, it’s important to turn off the main water system in the home, as any running water or leaks can simply create more moisture and lead to further mold growth. Meanwhile, the experienced crew members will set out to close all doors and windows between the affected areas to prevent spores from becoming airborne during the removal process.
2. Remove any damaged furniture, floorboards or other building materials and place them in heavy-duty plastic bags. The mold contamination damaged pieces of debris should be carefully handled and placed in durable bags that can be sealed off, not allowing any contaminated items to remain open to the air. Emptying a large majority of the space clears the way for easier cleanup and more effective mold containment.
3. Commence with cleanup procedures, using proper chemicals and tools to destroy mold growth while also using drying equipment to air out the home and complete the process. Once the team removes all traces of mold and decontaminates the affected areas, they’ll use high-pressure vacuums, fans or other drying equipment to eliminate moisture caused by possible leaks or high-humidity. Once the area has been deemed dry and clear, they’ll finish by replacing materials and running proper tests to ensure the area is secure.
Mold contamination is nothing to take lightly, so it shouldn’t be managed by anyone who isn’t equipped to handle its removal. Relying on professionals who understand the remediation process is the best and safest decision to make for your home.
An Overview on Mold
Mold damage in Enka, NC
Protect Your Business from Mold Growth
If you own a business in Enka, NC, you know that mold, especially black mold, can be a huge issue for your building. However, many people are unsure what causes mold and how to go about removing it safely. With a better understanding of mold, you can protect your business from its growth.
1. Is Mold a Common Problem in Businesses?
No matter the season, businesses of all types often encounter the issue of mold. Mold tends to grow in warm, damp areas, and events such as pipe breaks or floods can help to create the perfect environment for it to grow. After water damage occurs, mold can grow in a matter of days. If your building has a moisture problem, keeping your building dry can often prevent mold from growing.
2. How Long Does the Mold Removal Process Take?
Mold removal is not always a lengthy process, though cleanup generally depends on the amount of damage that has occurred. If a small pipe leak has only caused mold to grow in one area, then it is likely the removal process will be quick. However, if there is extensive structural damage to a building and black mold is present, then the process will be more thorough and therefore more time-intensive.
3. Who Is Responsible for Removing Mold?
The owner of the building is responsible for the safety and maintenance of his or her building, meaning he or she is responsible for ensuring mold is removed. Insurance can often help cover the costs of removing mold. If you’re unsure what costs are covered, it can be helpful to check your insurance policy and contact your insurance company in order to take the next steps to remove the mold.
Understanding why black mold grows and how to begin the remediation process can help to prevent growth and give you a greater understanding of what the removal process could look like for your business. If your business has mold, it might be helpful to work with mold removal and restoration professionals.
Why You Should Choose a Certified Mold Remediation Expert
Professionals have equipment used to ensure you get the job done right
Cleaning extensive mold growth can be a nightmare for any homeowner in Asheville, NC. A professional cleanup and restoration crew can help you address mold damage and restore your home. If you live in an area with multiple service providers, deciding which one to hire can be a challenge. However, at the end of the day, your goal is to ensure that your home is thoroughly cleansed and eliminated of mold. For this reason, a certified mold remediation expert is your best option.
What Certification Means
Widespread mold can significantly damage your home. A certified mold specialist will know how to efficiently address the problem, offering peace of mind to affected homeowners. To receive a mold certification, specialists must accomplish the following:
• Commit to a code of ethics
• Abide by standards of practice
• Complete testing and on-the-job training
• Renew certification regularly to verify accuracy of knowledge and techniques
Because of extensive training, certified mold experts possess the technical proficiency to thoroughly eliminate mold inside your home. This includes efficiently removing mold that has infiltrated building materials as well as preventing recontamination. Completing mandatory recertification also ensures that the contractor is up-to-date on the latest methods and technologies that benefit remediation efforts.
Insurance Company’s Preference
The Institute of Inspection, Cleaning and Restoration conducts research and sets industry standards. In addition, it’s one of the leading certification authorities. Like homeowners, insurance companies want assurance that mold remediation will be thoroughly and professionally completed. For this reason, insurance companies typically prefer experts possessing mold certification.
A Wise Choice
Mold remediation can be a costly expense. However, attempting to reduce cost by choosing an uncertified technician can create extra expenses in the long run. A certified mold technician is a worthwhile investment because their technical proficiency and dedication to best practices will ensure that the problem is adequately addressed from the beginning, helping to preserve your home’s internal integrity and reduce the likelihood of future mold growth.
For more on Asheville click here.
Four Signs To Call A Mold Remediation Company in Candler
SERVPRO Says Mold on Bread May Indicate a Moisture Problem
Candler Mold Remediation by SERVPRO
While there are numerous household issues that residential property owners may have to deal with, a Candler mold infestation is one of the most serious. If left unaddressed, mold can cause serious damage to the structural integrity of your property while also causing health effects. However, knowing how to recognize signs of mold as well as who to call for assistance can help you prevent the fungus from generating these adverse consequences. SERVPRO offers some information about signs of mold and how to secure mold remediation services.
Excessive Water, Humidity, Or Moisture
When your property is subjected to extensive water damage, the ideal environment for mold growth is created. Specifically, mold thrives best in warm, moist, dark environments. Additionally, mold spores, present in home environs, that have been dormant can become active within just several hours of exposure to moisture. As this growth activity speeds up, millions of spores can begin to develop colonies on your property. A complete inundation of water isn't necessary to put this process in motion leading to the need for mold remediation. High humidity or chronic moisture is enough.
Several visual signals can indicate that these fungi are present on your property. One sign is discolored surfaces. The mold can appear on wooden structural materials, tile grout or caulk, carpeting, and drywall as a red, brown, gray, or black coloration. It may also have a textured appearance. Mold penetrates the surface of the items that it grows on. Porous materials like drywall, carpets, and ceiling tiles often have to be discarded if the mold growth isn't arrested in its early stage.
A Musty Odor
Mold and mildew emit a musty odor. When homeowners note the onset of a musty scent on their property, it is often an indication that mold is present. In many cases, the fungi are thriving in enclosed areas like attics, crawl spaces, basements or wall voids. Under normal conditions, you will have a strong sense of a mold presence from visible signs. Extensive and expensive mold inspections are usually not necessary. SERVPRO can always be called upon to check your home.
Unexplained Health Issues
The allergens and mycotoxins from fungi may lead to health effects.
SERVPRO: The Solution For Your Candler mold remediation.
Once you realize that mold is present on your residential property, hiring an experienced mold remediation services is a must. The professionals of SERVPRO are IICRC-certified and possess advanced knowledge regarding how to expedite and optimize the mold remediation process. From the safety equipment to negative air pressure devices, specialized air scrubbers, and foggers, sanitizing products and odor removal, we re-create a safe home for you.
We’re Highly Trained Mold Remediation Specialists
SERVPRO of Asheville West specializes in water and mold damage restoration, the cornerstone of our business. We have the training and expertise to safely handle any mold situation in our communities of Candler, Asheville, and Leicester. Call us 24/7 for immediate service. (828) 684-8506
Help I Have Mildew in My Bathroom
Give SERVPRO a call if you notice mold growing in your home.
Have you noticed mildew growth in your Asheville, NC bathroom? Tile and grout commonly house black bathroom mildew. While the growth is troublesome, you can easily get rid of it by scheduling regular cleanings with a mold removal team. As you tackle this issue, you need to know a few things.
• Why is it there?
• What cleaners can get rid of it?
• How do you stop it from coming back?
Use this guide to help you better understand how to deal with this unfortunate mold problem.
Why Is It There?
Mildew, like other forms of mold, is typically introduced into a space due to a humidity problem. Bathrooms are notorious for having major issues with too much moisture. Whether you take steamy showers, have a faucet leak or splash bath water out of the tub, your bathroom could be damp enough to welcome mildew growth. If this moisture is left unaddressed, you may see various fungus growths in your space.
What Cleaners Can Get Rid of It?
Do you prefer natural cleaning methods? Do you want to use strong cleaners to get to the root of the problem? Regardless of the method you prefer, your mold remediation experts may offer a few different cleaners that can be used to get rid of bathroom mildew. The cleaning process is similar for both types of cleaners. You have to apply the solution, scrub the affected areas and rinse the cleaner away.
How Do You Stop It From Coming Back?
Once you have cleaned your bathroom of this growth, you likely don’t want to see it again. You may be able to prevent mildew by adding extra ventilation in your bathroom or finding other ways to control moisture. Wiping down the shower walls after showering can help remove extra droplets from the environment. Cleaning up spills and fixing leaks is another important step in prevention.
Bathroom mildew is a common problem in homes across Asheville, NC. Regular cleaning and professional assistance can help you manage this issue. Visit http://www.SERVPROashevillewest.com for more information on mold.
Prevent Mold Growth in Your Facility With These Easy-to-Follow Methods
Mold in a residential property.
Mold is a hazardous and destructive substance that can wreak havoc on your building’s structure and cause costly issues. Fortunately, mold prevention isn’t difficult. Thwarting mold growth in your facility primarily requires routine maintenance and quick fixes.
There are several steps you can take to keep mold from developing your facility to begin with:
• Put an end to water problems as soon as you notice them.
• Clean up flooding and water damage immediately.
• Dry out wet areas with dehumidifiers and fans.
• Maintain your facility’s plumbing and fix leaks right away.
• Invest in flood-prevention equipment, such as sump pumps and check-valves.
• Maintain your building’s gutters and downspouts, and make sure that they’re directed away from your building.
Areas of Concern
A significant portion of your mold prevention efforts should involve the above steps, but sometimes simply maintaining your building’s plumbing and cleaning up moisture issues is not enough. Mold hides in dark, damp places, and if an issue was allowed to fester for too long, your building may already have mold growth. If you discover a moisture problem and are not sure how long it went untreated, check the following areas for signs of fungal contamination:
• The HVAC system and drain pans
• Terminal units
• Cavity walls
• Ceiling tiles
• Electrical equipment
• Papers (such as in filing cabinets or in stacks)
Though maintaining your building is often enough to keep mold at bay, some growth may creep in despite your best efforts. When it does, call in the Asheville, NC mold remediation team to help locate the source of the issue. Sometimes a quick visual inspection may be all it takes to find the problem. In more severe situations, the team may need to perform a mold test. Either way, the right professionals can help you eradicate the problem and give you some mold prevention tips to utilize in the future. Visit http://www.SERVPROashevillewest.com for more information on mold.
The Importance of Certification for Mold Remediation Professionals
The moisture buildup in a non-air-conditioned space can lead to a growth of unwanted mold.
Mold remediation may seem like a straightforward process on the surface, but there is quite a bit of knowledge and skill required to do a thorough job. Only certified mold experts are able to exhibit this level of expertise. The training required by the Institute of Inspection, Cleaning and Restoration Certification (IICRC) to receive mold certification is based on extensive research and teaches professionals in Asheville, NC how to resolve mold issues in an efficient manner.
Grounded in Research
The instruction manuals published by the IICRC are useful references for remediation professionals. The wealth of knowledge contained within them is compiled from various reputable sources:
• Remediation contractors
• Public health experts
• Industrial hygienists
• Trade associations for the restoration industry
• Restoration training schools
• Others with practical remediation experience
This extensive knowledge base is crucial for supplying certified mold specialists not only with the principles of remediation but also the means to use those principles in practical applications.
Thorough in Scope
The training required by the IICRC for certified mold remediation is comprehensive. Certification indicates to the home insurance company that the professional doing the job has the specialized skills that meet the company’s high standards for completion. Through the training process, mold remediation specialists learn how to identify and assess mold growth during an inspection, distinguish between different types of mold and their potential health effects, understand testing procedures and what their results mean, demonstrate proper safety measures regarding containment and removal, and restore the damaged home to its former state. Insurance companies want assurance that the remediation professional knows how to resolve mold issues completely, and certification ensures that knowledge.
Based on extensive research and experience, mold certification tells homeowners in Asheville, NC and their insurance company that the remediation process will be handled correctly. That is why it is important to hire a certified mold specialist whenever a home has a mold problem. Visit http://www.SERVPROashevillewest.com for more information on mold.
3 Tips for Preventing Mold Growth in a Rental Property
Whether you own a rental home or apartment complex in Asheville, NC you need to ensure your tenants have a safe environment. This means a house that is free of any water damage or mold growth. You, as the landlord, need to be proactive about mold prevention. It actually works in your best interest to prevent mold because you will save money and increase the chances of the tenants wanting to renew the lease.
1. Address Leaks Before Renting a Property Out
When you are between tenants in a property, you want to give the building a thorough inspection. During this examination, you should keep an eye out for any areas that are prone to leaking. This includes holes in the roof that could cause mold development in the attic. You also need to ensure the pipes are still in good working order. This kind of inspection should take place at least once annually.
2. Be Wary of Carpets
As the property owner, part of your mold prevention may require you to tear out carpets and replace them with hardwood. Even spilling a glass of water on a carpet can lead to mold growth. Even if only one area of the carpet has mold, the entire thing will need to be torn out, which can be costly.
3. Address Any Mold Immediately
It is unsafe for your tenants to be in a building with mold. Your tenants may even refuse to pay rent until the issue is handled. Therefore, you want to stay in the loop, and if your tenants tell you about a problem, then you need to take care of it immediately.
Mold prevention is much easier to handle than removal. In the event you do find mold in your rental property, you need to hire a professional crew right away so that your tenants will be happy and safe. Visit http://www.SERVPROashevillewest.com for more information on mold.
5 Steps to Prevent Mold
5 Steps to Prevent Mold
If water damage has occurred in your residential property in Asheville, NC you should act quickly to prevent mold growth. Here are five mold prevention tips prioritized in order of importance.
1. Fix the Water Problem
Whether a pipe has burst or sprung a leak, a water-based appliance has malfunctioned, or a storm has caused flooding or compromised a structure, you need to immediately address the water issue and stop it from coming in. Mold thrives on moist surfaces.
2. Dry Water Damage
Do everything you can to remove excess water within 24 to 48 hours after an incident occurs. You might try a combination of drying and ventilation or call a service that specializes in removing water from building materials, carpets, drywall, or furniture.
3. Lower Humidity Levels and Temperatures
After you dry wet areas, you should make the indoor environment unconducive to mold. The way you do that is by using a dehumidifier to keep humidity levels between 30% and 60%. You may also want to turn off the heat and keep the interior relatively cool.
4. Ventilate Rooms Where Heat and Water Combine
Make any structure less inviting for mold by properly ventilating rooms with the two major risk factors: heat and water. Bathrooms, kitchens, and laundry rooms all have water-based appliances or fixtures. In addition to maintaining pipes to prevent serious leaks, proper ventilation will help to make sure that mildew and mold do not start growing.
5. Contact an Indoor Environmental Specialist
If you have followed these steps and are still worried about mold, you should contact a professional restoration service in Asheville, NC that specializes in mold testing and clean-up. This service company can determine whether mold is present and help you address the problem or prevent mold from forming.
These mold prevention steps are intended to provide a sense of the major priorities after water damage has occurred. It is not difficult to prevent mold growth if you eliminate the causes up front.
Visit http://www.SERVPROashevillewest.com for more information on mold.
Learning How to Recognize Mold Growth and Damage
Learning How to Recognize Mold Growth and Damage
When mold in the home or commercial mold damage occurs, the only thing people should do is call a professional restoration company for mitigation and remediation services. DIY mold removal is never recommended, and it’s not a good way to save money on mitigation and remediation services. The average person is unaware if mold growth is black mold, if mold growth behind the walls is present, if mold is really just mildew or another fungus, or how it spreads quickly.
If anyone suspects mold in the home or commercial mold damage is a problem, their best bet is to call for professional remediation and mitigation with a restoration company that specializes in mold removal, professional deodorization to get rid of that smelly odor only mold emits, and to learn the preventative techniques to keep mold at bay.
What Does Professional Remediation and Mitigation Offer?
When mold in the home and/or commercial mold damage is suspected, a restoration company comes to the building and inspects the damage. If mold growth is found, they remove it, clean it up, dry it out, and they help home and business owners learn how to prevent mold or dry rot from occurring later. The biggest problem is most people have no idea they have mold damage, they don’t know how to recognize things like a smelly odor, dry rot, fungus, or mildew as signs of potential mold damage or even mold growth behind the walls, and they think they can save money not calling a restoration company.
The only thing home and business owners should do to combat mold growth or mold damage is turn off the HVAC system to prevent the spread of spores that cause mildew and fungus growth throughout the house, and dry out the water that might be causing mold growth as quickly as possible. Mold damage is caused when there’s a marriage of high humidity and moisture anywhere in a home. It takes very little time for this fungus to grow and spread, and it causes numerous issues in any home or office.
The Signs of Mold Growth
One of the biggest issues home and business owners face is mold growth behind the walls. They don’t see it, so it’s a problem that usually grows out of control before it’s noticed. Even if people can’t see it, though, they can learn to recognize the signs of mold growth behind the walls.
- Dry rot
- Smelly odor
- Frequent use of deodorization that doesn’t work long ridding the building of a smelly odor
Dry rot, mildew, and fungus are all caused by excess moisture. While none guarantee there is mold anywhere, each one could indicate professional mold removal is imminent. Perhaps the biggest indication of mold damage is any moisture from a flood, a leak, or a burst pipe. Anyone who smells something musty and uses deodorization techniques to cover it up might have mold damage behind the walls. The only way to get rid of it is with professional remediation, mitigation, and deodorization techniques.
Many people worry about finding black mold in the home or office, and they don’t know there are various forms of black mold. Black mold is not always the kind that causes concern, but it takes a professional to figure that out with no uncertainty. There is never a time when trying to remove any black mold without professional help is a wise idea.
Professional mold removal is always necessary if anyone finds mold in the home or commercial mold damage. Even if someone only suspects there is mold in the home or commercial mold damage, it’s imperative they call right away to discuss their findings with the professionals. It’s the best way to prevent further damage to both the home or business and the owner’s pocketbook or wallet.
Visit http://www.SERVPROashevillewest.com for more information on mold.
Tips For Finding Effective Mold Remediation
Tips For Finding Effective Mold Remediation
If you currently suspect that you have mold damage and mold growth in your home, it might be time to hire a professional mitigation and remediation company. This restoration company can be there for you when you're dealing with that smelly odor, dry rot and black mold that is so problematic to you and your family. Mold in the home should be cleaned and go through deodorization from a proper mitigation agency. These mitigation experts are there to make the job easier for you because you're not having to deal with the commercial mold damage on your own.
Finding Mold Damage and Mold in the Home
The best way to find out if you have a mold growth problem or mold in the home is to look for mildew and fungus on walls and ceilings. This is a sign that there is probably mold growth behind walls in the house that needs proper deodorization and mold removal. Remediation should always be done by the professionals because it ensures that the mildew and fungus are totally gone from the property and has little chance of coming back. Mold removal only takes a few days, but the restoration company and remediation experts can come back several times over the course of a few months to get the job done.
What it Can Do to the Home
Mold damage is incredibly problematic for most homes and businesses. This is especially true if you have black mold or dry rot. You might also have mold growth behind walls that you aren't even aware is there. Only an expert restoration company can check this for you and get it done in the proper manner. Mold damage can get much worse if you leave it without proper mold removal, so be sure to call in the fungus and mildew experts who have handled black mold and dry rot themselves in many homes and business offices.
Hiring a Professional Mitigation and Remediation Company
In order to hire a professional mold removal agency, you'll need to find one locally that can come in and get the job done. These agencies deal with mildew, fungus and even mold growth behind walls to totally rid this problem and smelly odor from your home. They use deodorization to get rid of that smelly odor to prevent the problem from coming back. If you attempt to get rid of the commercial mold damage on your own, you may be left with growth that comes back time and time again.
What to Expect
For anyone who has mold in the home, mold growth and dry rot, you need a professional commercial mold damage agency. The restoration company is there to make everything alright so that you can feel confident that it is being done in the correct manner. They bring all of their own deodorization tools to get rid of that smelly odor and mold growth behind walls. Their expertise with commercial mold damage is far superior to anything you would be able to do on your own.
How to Prevent Mold Growth and Black Mold
The best way for you to prevent mold from becoming a problem again is for you to keep things dry and tidy at home. This entails you making sure that you're hiring mold professionals as often as they are needed and whenever you notice an issue. It might also be a good idea to have your home or business professionally inspected once or twice a year for any possible signs of mold growth. There are so many benefits to getting this done and knowing that your home is totally free of mold and mildew problems. Be sure to look for a local company you can trust so that you know they are there to make life easier for you when you are struggling to handle the problem yourself.
Visit http://www.SERVPROashevillewest.com for more information on mold.
How to Handle Mold Damage in Your Home
How to Handle Mold Damage in Your Home
A good majority of homes deal with mold damage from time to time. Having a mildew and fungus problem is incredibly frustrating and problematic. The reason for this is because, if it is left to fester, you'll have a major issue on your hands that needs extensive mitigation services. Understanding what to look for when it comes to a fungus problem and how to handle mold in your home will help you to have a house you and your family can feel comfortable living in.
How to Know There's a Mildew and Fungus Problem
One way to tell if your home is experiencing a fungus and mildew problem is if you see it with your own two eyes. Mold damage can be seen as dark splotches on walls, ceilings and even flooring. Another way to tell if you have mold damage and mold in your home is if you have a pungent smelly odor in any one particular room. This smelly odor is caused by the fungal spores floating throughout the air, requiring proper deodorization techniques to be used to get rid of them entirely.
Do You Need the Mitigation and Remediation Pros?
Mold removal can be incredibly tricky when done on your own. If the mold removal isn't done in the correct manner, you'll deal with recurrent mold in the home or commercial mold damage. This is why expert mitigation and remediation services are needed by most people. Mitigation and remediation experts are there to help with this particular task, and they have the deodorization skills and tools necessary to get rid of more than just that moldy smelly odor.
Why Mold Damage is So Problematic
The reason mold in the home or commercial mold damage is so problematic is because of how quickly it can spread. If you don't get professional remediation done, you're going to deal with a problem in your house or business that simply won't go away. It can result in needing to get rid of walls, ceilings, sheet rock and flooring that has been affected by the commercial mold damage.
Avoiding Do-It-Yourself Mold Removal Methods
The problem a lot of homeowners have when it comes to dealing with mold in their home or having commercial mold damage is that they try to do the mold removal all on their own. The issue that comes with this is that you're often only dealing with the mold at the surface level. You don't have the tools necessary to perform professional deodorization to get rid of the smelly odor and the floating mold spores throughout the air. If you have a major mold issue in your home, it is especially important to hire the experts to prevent an even bigger problem down the road.
How to Prevent Fungus and Mildew From Coming Back
Apart from professional mitigation and deodorization, it is just as important for you to prevent mold growth altogether. The way to do this is by keeping an eye on anything water-related in the house. If you notice leaks or plumbing issues, get them fixed and repaired right away to avoid mold growth from occurring. If you notice that you have some dark splotches of mold growth on the walls or ceilings, call in the experts immediately so that they can rectify the issue before it is able to get much worse. If you've recently purchased a home, you might want to consider having your house inspected professionally so that you can be alerted of a mold problem in an area you might not necessarily check yourself. By keeping your home clean and dry, you're less likely to have a mildew issue in any one room. Keep in mind that even though remediation companies charge a relatively substantial fee for their services, many homeowner's insurance providers will cover the full cost of hiring one of these experts.
Visit http://www.SERVPROashevillewest.com for more information on mold damage.
5 Steps to Permanent Mold Removal
5 Steps to Permanent Mold Removal
Mold is a common growth that can be noticed in households and offices especially in dark and moist places like the basement. Most homeowners have come across this greenish black substance growing on the walls around their home or office. This growth is toxic and can lead to severe problems if not tackled promptly. Therefore, it is essential that mold removal be carried out promptly to eliminate this toxic growth.
Most homeowners prefer to tackle mold in home and mold damage cases by their own. Unfortunately, most homeowners are not professionally trained. Their effort at cleaning the mold growth does not get rid of the fungus completely and it normally re-emerges after a few days. Mold in home cases will often include the presence of a smelly odor. In such situations, proper mitigation measures will also include deodorization to help on mold damage. For proper remediation, however, a commercial mold damage removal service is your best bet; it will offer you a more permanent mitigation effort.
Hiring a commercial mold damage removal service is preferred as the mold removal damage is carried out step by step. Once remediation is complete, the homeowner is completely assured of a healthy environment free of any further mold damage. To completely eradicate that mold in home or office problem, professional follow the steps below.
1. Assessment – This is the first step and it involves checking to determine what type of mold damage is troubling you. Black mold is among the most troublesome fungus types as it is the cause of most mold-related health problems, as well as the smelly odor that emanates from damp, mold affected corners.
2. Containment –Mildew and mold removal would then need to be contained . Commercial mold damage remediation will involve closing entire sections affected by mold. This is because the fungus reproduces at a high rate. The spores released are also harmful to humans. Containment, thus, helps minimize the effects of mold and mildew removal. It is also part of the contractor’s mold mitigation program, and it ensures the rest of your house is not contaminated by using plastic sheets with tape, before tackling the contaminated sections.
3. Filtration – To get rid of the mold spores that contaminate the air, the contractor will use highly developed filtration machines. The machines come fitted with HEPA (high-efficiency particulate air) filters, capable of getting rid of even the minutest pores present in the air. Filtration will also play a part in getting rid of any smelly odor present. It, however, does not comprise total deodorization and some odors might persist after this step.
4. Removal – This is the penultimate stage and it involves actual removal of the toxic fungus from walls, roofs and other affected areas. If the infestation is severe, remediation might also require the removal of porous material around the area infected. Often, mold and mildew grow deep inside the concrete pores to thrive and reproduce. In such cases, mitigation will often involve removal of infected material. With complete removal of the mold plus the areas severely infected, the home or business will be almost entirely rid of any smelly odor. Further deodorization thus need not take place.
5. Repair – Some commercial mold damage removal service also provide repair services to customers whose homes suffer extensive structural damage. The infected area is restored in a manner that ensures mold can no longer grow. Some companies also provide guarantees for a certain period to cater for any related problems including further mold attacks for free or at a subsidized fee.
Homeowners are advised to seek professional mold removal service providers with their mold problems. They will follow the necessary steps to provide quality service and ensure no further mold in home occurrences. Should some damp and unpleasant smells persist, such service providers will recommend to you further deodorization measures that will eliminate the problem. Visit http://www.SERVPROashevillewest.com for more information on mold removal.
Methods Used By SERVPRO To Keep Mold Damage From Spreading
Any case of mold damage requires some amount of sanitizing to get rid of the smallest spores and patches of mold on an object.
Techniques Used by SERVPRO To Remediate Mold
Every case of mold damage is different, but in most of them, the potential for further damage to the home or its residents can be relatively high if not properly treated. In these cases, we employ a number of strategies to stop the spread of damage and keep residents safe while the mold is being remediated. Here are some of the methods our technicians may employ in your home to stop the spread of mold.
Mold Isolation and Containment
First and foremost when dealing with most cases of mold damage in Georgetown is quarantine and containment. We typically seal off an area or the specific spot of mold growth to prevent its spores from becoming airborne and reaching other parts of the home. This also helps to contain compounds released by some types of mold which may cause ill health effects. Within this isolated area, our technicians can do their work, protected by specialized equipment and clothing.
Sanitizing Widely and Thoroughly
Any case of mold damage requires some amount of sanitizing to get rid of the smallest spores and patches of mold on an object. We're very thorough in this process, sanitizing all at-risk objects, surfaces, and parts of the home with UV rays or other sanitizing machines. Note that you should allow us to clean and sanitize objects with mold damage, as without the proper experience and equipment, this may prove hazardous to you.
We use industrial-strength air filters to remove mold spores and contaminants from the air, preventing their spread across the home after the damaged region itself has been cleaned up. This process also helps to remove the musty and foul odors often associated with mold growth and get your home back into a more livable state.
SERVPRO of Asheville West is a well-equipped local business that specializes in mold, water, and fire damage restoration services. Call us at (828) 684-8506 for expert treatments and care for mold damage in your home.
Mold and Water Damage Go Hand in Hand
Mold Grows in Asheville Properties, Call SERVPRO for Remediation
SERVPRO Can Restore Water and Mold Damage to Your Property
The common signs of fungi include visible patches in varying colors including black, green, red, blue, and white. Mold can produce a robust and musty odor; it extensively discolors walls, ceiling, and floors. Its presence can also cause allergens and irritants. Our prompt response can be a key to mitigating further mold growth, especially when there is or has been water damage.
Mold damage in Asheville is an unwelcomed sight. This beautiful community is popular in art, science, health, entertainment and so much more. Any mold growth must be quickly handled. SERVPRO is your go-to mold removal and remediation service for residential and commercial properties.
The historical aspects of our North Carolinian neighborhoods are why it is important to use an experienced and reputable company. Our technicians are IICRC certified, well trained and qualified to handle mold problems in your home or business. We work diligently to make sure that any mold problems are mitigated in an expedient manner.
Ridding your property of mold helps to ensure the health and safety of family members and workers. Mold begins as a result of water damages. Our SERVPRO professionals enter your home or business with the knowledge and necessary facts of how mold growth propagates and how to repress cross contamination.
We employ processes for removal of mold, which involves assessment and inspections; advanced mold containment procedures and specialized air infiltration treatments. We will expertly clean your furnishings and belongings; we disinfect and deodorize. Depending on the extent of your mold damage, we provide both minor repairs and major repairs both in homes and businesses of all sizes. In the case of extensive infestation and contamination, materials and possessions may be discarded according to prevailing codes.
The professionals at SERVPRO of Asheville West will help to protect and secure your property to get it back to a pre-loss condition. We are locally owned and operated. Having just one qualified company with a full range of remediation and restoration services will save our property owners time, and keep costs low. Call us at (828) 684-8506 so that we can answer any questions you have and to introduce our many mold and water remediation services to you.
The Three Types of Asheville Mold Growth
Mold is only able to grow under certain conditions.
The Three Types of Mold Growth
Asheville mold is the most common form of fungi out there. There are always mold spores in the air, both outside and inside. Typically, these spores are not harmful, and they are present in such a low concentration that they are not a threat. However, when it develops in a confined area under the right conditions, it can be a real health hazard.
Mold is only able to grow under certain conditions. First of all, moisture is required. Second, a certain temperature range is necessary, and this happens to be the same range that is optimal for humans. Third, mold can only grow on a surface. Mold takes its nutrition from carbon, meaning that it can grow basically anywhere these conditions are present. However, Asheville mold needs a lot of moisture to successfully grow, so it tends to develop in environments with a lot of water flow. Mold can be eliminated without this moisture source.
A common misconception is that mold is always toxic, but most molds are actually non-toxic, although health effects can vary depending on the type. The following are the three major mood groups:
These are not hazardous to humans, although they can cause allergic reactions in those who are prone to asthma or allergies. Reactions are typically more mild, such as rashes, itchy throat, and irritation of the nose and eyes. Allergenic molds are ubiquitous, so the best thing to do is make sure that humidity stays low in the areas of interest.
These can potentially cause health issues, typically through physical contact or respiratory infections. Often, healthy people will not be affected. However, people such as children, elderly individuals, and those who already have respiratory conditions can suffer health issues due to this type of mold.
These include molds that are very dangerous and can lead to severe health issues for anyone. These are very rare, but it is impossible to know the exact type of mold without the appropriate lab tests. The best known toxic mold is "black mold," but toxigenic mold can be any color.
Asheville mold can be common after water damage. If you think there may be mold in your home, you should contact a professional mold inspector to examine your home in order to avoid long term health consequences. Superior Restoration is a water damage restoration company that serves Southern California with mold inspection and remediation services.
The Mold Remediation Process
Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. Learn more about our mold remediation process.
- Emergency Contact - (828) 684-8506
- Inspection and Mold Damage Assessment
- Mold Containment
- Air Filtration
- Removing Mold and Mold-Infested Materials
- Cleaning Contents and Belongings