How To Clean Up After a Pipe Breaks
A property owner or manager can take several measures to clean up after a pipe breaks at a building in Alexander, NC. The following four steps can reduce the extent of damage due to bursting pipes and start the drying process as soon as possible.
1. Shut Off the Water Supply
The most effective way to limit damage before a plumber arrives to fix broken pipe problems is to shut off the water supply valve. This valve is located where pipes enter the building, near the water meter. Turn the valve to stop the flow of water and then turn on a faucet to relieve pressure in the lines and reduce the amount of water emitted from bursting pipes.
2. Extract Standing Water
As soon as a plumber fixes the broken pipe, it is time to start mitigating damage. Removing as much water as possible is the most important step. Non-professionals may have access to a mop or wet vac and the option to rent a pump. For the best results, a building owner or manager should rely on damage mitigation professionals who have specialized expertise and equipment.
3. Promote Area Drying
Next, a building owner or manager should promote drying by increasing ventilation. A damage mitigation service can provide air movers or fans to ensure that the affected area will dry quickly.
4. Lower Humidity Levels
Reducing residual moisture is critical for preventing secondary damage such as corrosion, rot or mold. Experts recommend using a dehumidifier to maintain relative indoor humidity levels between 30 percent and 50 percent.
Depending on the amount of water emitted from bursting pipes, it may be advisable to arrange for professional cleanup and drying. For damage mitigation expertise and access to equipment that can accelerate the water extraction and drying process, a property owner or manager should contact professionals who specialize in water damage in Alexander, NC.